Manual overview 19
Manual overview
This manual provides all the information required to power, connect, and
configure your Matrox Iris GTR to develop and deploy imaging applications.
Most of this information is pertinent to both the Matrox Iris GTR with Design
Assistant and the Matrox Iris GTR with MIL-only.
For information on powering your Matrox Iris GTR, reading the LEDs,
connecting your smart camera to your network, and connecting to it remotely,
and connecting it to third-party devices, refer to Chapter 2: Powering and
connecting to your Matrox Iris GTR.
For a summary of the key features of Matrox Iris GTR, and pinout descriptions
for external connectors of your Matrox Iris GTR, refer to Appendix B: Technical
reference.
To select a lens, refer to Appendix C: Selecting a lens.
If you have a Matrox Iris GTR with Design Assistant, to use the various utilities
and to recover the Matrox Imaging operating system (MIOS) on a Matrox
Iris GTR, refer to Appendix D: Matrox Imaging operating system utilities and
recovery.
If you have a Matrox Iris GTR with MIL-only, to backup and restore the smart
camera’s operating system partition, refer to Appendix E: Microsoft Windows
operating system partition backup and recovery.
For information on how to use your Matrox Iris GTR breakout board, refer to
Appendix F: The Matrox Iris GTR breakout board.
To Next Page
Loading...
