94 Appendix E: Microsoft Windows operating system partition backup and recovery
8. The next page is presented with an option already selected: Backup the OS for
this unit; leave this option as is. Below this, you can specify the location of your
USB key. If you do not already have your USB key connected, you can do so now.
It is not recommended to save the backup in the current operating system
partition, or to a virtual drive. It is also recommended to save to a USB key with
at least 16 Gbytes free. Once you have selected the location of the USB key, click
on OK and the Matrox Rescue utility will copy the information to the destination
specified.
9. When the process completes, a message dialog will open, explaining what was
done. Click on the OK button.
10. After the reboot, if UWF was enabled before you started the backup process,
launch the OSConfig utility from the Windows Start menu, and re-enable UWF.
❖ Note that to restore this backup without a working copy of the operating system
on your Matrox Iris GTR, additional files are required. This backup .wim file can
either be used with the Matrox Iris GTR Rescue utility (OSConfig), if the
RECOVERY partition is not corrupt, or with a rescue USB key, if the
RECOVERY partition is corrupt. To restore your Matrox Iris GTR with the
Matrox Iris GTR Rescue utility, refer to the Restore Windows 10 IoT Enterprise
section. To created a rescue USB key, refer to the section Making a rescue USB key
for Windows10 IoT Enterprise section.
Making a rescue USB key for Windows10 IoT
Enterprise
In the case that your Matrox Iris GTR operating system partition becomes
corrupt, the easiest way to restore your smart camera is to use a rescue USB key
containing the Matrox Rescue utility (OSConfig) and a backup of your operating
system partition. This procedure requires a USB key with at least 16 Gbytes free.
To create a rescue USB key, you must access your Matrox Iris GTR directly; you
cannot perform this task remotely. To access the camera directly, connect a display
devices, keyboard, and mouse to your Matrox Iris GTR. For information, refer to
Powering and connecting to your Matrox Iris GTR section, in Chapter 2: Powering
and connecting to your Matrox Iris GTR for more information.
To Next Page
Loading...
