Backup Matrox Iris GTR Windows 10 IoT Enterprise 93
Backup Matrox Iris GTR Windows 10 IoT
Enterprise
You can create a backup .wim file of your Matrox Iris GTR’s operating system
partition and save the file to a specified location. It is useful to do this procedure
as soon as you have completed the OOBE on your Matrox Iris GTR. Note that,
the backup process will copy the unique ID of the camera; this ID will be applied
to any Matrox Iris GTR that is restored with this backup .wim file. If two cameras
with the same unique ID are running on the same network, there will be network
conflicts. Be aware of this limitation when performing a backup on a network
camera.
To perform a backup, you must access your Matrox Iris GTR directly; you cannot
perform this task remotely. To access the camera directly, connect a display devices,
keyboard, and mouse to your Matrox Iris GTR. For information, refer to Powering
and connecting to your Matrox Iris GTR section, in Chapter 2: Powering and
connecting to your Matrox Iris GTR for more information.
To backup your operating system partition, perform the following directly form
your Matrox Iris GTR:
1. Save all your work and close all running applications.
2. From the Windows Start menu, launch the OSConfig utility.
3. Go to the Write Filter tab. If the Unified Write Filter (UWF) option is enabled,
disable it.
4. Click on the Capture OS tab.
5. On the Capture OS tab, click on the Reboot and launch backup tool button.
Your Matrox Iris GTR will reboot.
6. When the reboot process completes, a list of possible options is displayed. Click
on the Troubleshoot option, and then on the Matrox Rescue Utility option.
7. When the Matrox Rescue Utility dialog opens, you must read the license
agreement. When done, click on the I agree button to accept the license
agreement.
To Next Page
Loading...
