Inspecting your Matrox Iris GTR package 13
• VGA/USB connector cap.
• Liquid lens connector cap.
• Matrox Iris GTR Rescue Utility DVD (which includes a sticker with your
Windows 10 IoT enterprise license).
• System and Drivers Utilities DVD.
❖ Note that your Matrox Iris GTR base package does not include any cables, a power
supply, or a manual iris lens. To purchase these items, contact a Matrox sales
representative.
Matrox Iris GTR starter kits
There are two versions of the Matrox Iris GTR starter kit. The
GTR-STARTER-KIT is meant for use with all Matrox Iris GTR smart cameras
with sensors less than 5 Mpixels; these kits include a standard sized lens. The
GTR5000-STR-KIT is meant for use only with the Matrox Iris GTR 5000 series
of smart cameras (which have a 5 Mpixel sensor); this kit includes a slightly larger
lens. Both Matrox Iris GTR starter kits include the following:
• External power supply.
• GTR-CBL-ETH/5, a 100/1000 BaseT Ethernet cable with an M12 8-pin (male)
X-coded connector on one end and an RJ-45 registered jack on the other. This
cable connects your Matrox Iris GTR to another computer or a network.
• GTR-CBL-PWR/3, a Digital I/O and power cable with an M12 12-pin (male)
connector on one end and open ended wires on the other. This cable connects
your Matrox Iris GTR to power and third-party digital I/O devices.
• GTR-CBL-VGAUSB, a VGA/USB cable with an M12 12-pin (female) connector
on one end and a HD-15 (female) connector and a USB connector on the other
end. This cable connects your Matrox Iris GTR to a display device and a USB
device (such as, a keyboard or mouse).
To Next Page
Loading...
