Making a rescue USB key for Windows10 IoT Enterprise 95
When creating a rescue USB key, you must already have a backup file that you
want to use for the recovery. This could either be the Matrox default factory
settings backup .wim file (W10Ex64GTR.wim) that comes with your installation
DVD, or a backup file that you have created (W10EGTR.wim) using the
procedure in the Backup Matrox Iris GTR Windows 10 IoT Enterprise section earlier
in this chapter.
To create a rescue USB key of your operating system partition, perform the
following:
WARNING! Note that this will reformat your USB key and all its data will be erased.
1. Reboot your Matrox Iris GTR.
2. During the reboot, after the power-on self-test (POST), press the F8 key. Select
Repair your computer in the presented Advanced Boot Options screen.
3. When the reboot process completes, it will display a screen asking you to choose
an option. Click on the Troubleshoot option, and then on the Matrox Rescue
Utility option.
4. When the Matrox Rescue Utility dialog opens, you must read the license
agreement. When done, click on the I agree button to accept the license
agreement.
5. In the following dialog, select the Copy Matrox Rescue Tool to USB storage
device menu option.
6. Browse to the file location. You can either chose to insert the installation DVD
with the Matrox default factory settings backup .wim file (W10Ex64GTR.wim)
or use a USB key with the files that you have created, such as the backup .wim file
or captured backup .wim file (W10EGTR.wim). You can navigate to the following
locations to find the .wim file of your customized operating system partition:
-DVD drive: <DVD>:\Ximage
-USB key: <USB>:\
7. When this operation completes successfully, your rescue USB key can be used to
restore the operating system on other Matrox Iris GTR smart cameras.
To Next Page
Loading...
