191
Defining your A/V Tools options
$ Broadcast-quality Source Select this if your source device is
broadcast-quality. This setting provides the best capture results for most
devices.
$ Consumer-quality Source Select this if you’re having problems
capturing video because your source device doesn’t meet
broadcast-quality standards. For example, the capture may be interrupted
when you try to capture from certain composite and S-Video devices,
especially from low-quality VCRs. If this happens, selecting
Consumer-quality Source will allow the video to be captured, but you
may experience dropped frames during the capture.
¦NoteFor any change to the input type to take effect, you must restart Matrox
A/V Tools.
12 If your editing video format is 1080p @ 23.98 fps, 25 fps, or 29.97 fps, from
the
Output Format list, select the format (p or PsF) that you want for
previewing your captured video. For example, if you’re capturing to 1080p
@ 25 fps, you can choose to output 1080p or 1080PsF @ 25 fps video for
preview.
13 Click OK to save your settings.
To Next Page
Loading...
