Matrox MXO2 - Matrox Pcie Host Adapter Specifications; Matrox Pcie Host Expresscard;34 Adapter; For Laptops

348
Appendix E, Matrox MXO2 Specifications
• Component S/N (Y, Pb, Pr): > 54 dB, unified weighted
Audio
• Unbalanced analog audio inputs
$ 1x stereo pair
$ RCA connectors
$ Input impedance: > 10 kΩ
$ Line level with 18 db headroom (max level: +8 dBv)
• Unbalanced analog audio outputs
$ 1x stereo pair
$ RCA connectors
$ Output impedance: < 200 Ω
$ Line level with 18 db headroom (max level: +8 dBv)
• Unbalanced analog audio performance
$ Sampling frequency: 48 kHz (using 128x oversampling)
$ Quantization: 24 bits
$ S/N: > 90 db
$ THDN at 1 kHz, nominal level: < 0.02%
$ Frequency response: +/- 0.5 dB, 20 Hz to 20 kHz
$ Channel separation: > 100 db
Environmental specifications
• Minimum/maximum room operating temperature
1
: 0 to 40º C
• Minimum/maximum storage temperature: –40 to 75º C
• Maximum altitude for operation: 3,000 meters
• Maximum altitude for transport: 12,000 meters
• Operating humidity: 20 to 80% relative humidity (non-condensing)
• Storage humidity: 5 to 95% relative humidity (non-condensing)
Matrox PCIe host adapter specifications
Matrox PCIe host ExpressCard/34 adapter
(for laptops)
$ Standard ExpressCard/34
$ Dimensions: L 96 mm × W 33 mm × H 13 mm (3.8” × 1.3” × 0.5”)
1
This temperature range assumes that your Matrox MXO2 hardare doesn’t exceed the
maximum operating temperature as explained in “Monitoring your MXO2’s operating
temperatures” on page 283.