Matrox MXO2 - Appendix E Environmental Specifications

336
Appendix E, Matrox MXO2 Specifications
$ BNC connector
$ Output impedance: 75 Ω
$ Nominal output level: 1V
p-p
• Balanced and unbalanced analog audio performance
$ Sampling frequency: 48 kHz (using 64x oversampling)
$ Quantization: 24 bits
$ S/N: > 85 db
$ THDN at 1 kHz, nominal level: < 0.05%
Environmental specifications
• Minimum/maximum room operating temperature
1
: 0 to 40º C
• Minimum/maximum storage temperature: –40 to 75º C
• Maximum altitude for operation: 3,000 meters
• Maximum altitude for transport: 12,000 meters
• Operating humidity: 20 to 80% relative humidity (non-condensing)
• Storage humidity: 5 to 95% relative humidity (non-condensing)
Matrox MXO2 Rack specifications
General
• Video formats NTSC, PAL, NTSC-EIAJ, 1080i/p/PsF, 720p, 576p, 480p
• Regulatory compliance
$ FCC Class A, CE Mark Class A, ACMA C-Tick Mark, VCCI
$ RoHS Directive 2002/95/EC
• Dimensions (without rackmount brackets)
$ Length 437 mm (17.2”)
$ Width 208 mm (8.2”)
$ Height 86 mm (3.4”) (two rack units)
• Dimensions (with rackmount brackets)
$ Length 483 mm (19”)
$ Width 208 mm (8.2”)
$ Height 89 mm (3.5”) (two rack units)
• AC power
$ 100-240 VAC 50-60 Hz
1
This temperature range assumes that your Matrox MXO2 hardare doesn’t exceed the
maximum operating temperature as explained in “Monitoring your MXO2’s operating
temperatures” on page 283.