Matrox MXO2 - Autodesk 3 Ds Max; Autodesk Combustion; Eyeon Fusion; Newtek Lightwave 3 D

206
Chapter 13, Using the Matrox WYSIWYG Plug-ins
Autodesk 3ds Max
1 Start Autodesk 3ds Max and open the file you want to preview.
2 Open the Render Scene dialog box by choosing Rendering > Render
Setup
.
3 Click the Common tab.
4 Under Render Output, click Devices.
5 In the Select Image Output Device dialog box, select Matrox WYSIWYG
Preview
, and click OK.
6 Click Render.
Autodesk Combustion
1 Start Autodesk Combustion and open the file you want to preview.
2 Choose File > Preferences > Framebuffer.
3 In the menu beside Framebuffer Type, select Matrox WYSIWYG
Preview
, and click OK.
eyeon Fusion
1 Start eyeon Fusion and open the file you want to preview.
2 Right-click on the file, and choose View On > Matrox WYSIWYG
Preview
.
NewTek LightWave 3D
1 Start NewTek LightWave 3D and load the file you want to preview by
choosing
File > Load > Load Scene.
2 Click the Render tab.
3 Under Options on the left hand side of the screen, click Render Globals.
4 From the Render Display menu, select Matrox WYSIWYG Preview.
5 Under Render on the left hand side of the screen, click Render Frame.