Matrox MXO2 - Page 347

321
Supported video output formats for playback
1080p/23.976
5
NTSC
NTSC, 480p @ 59.94 fps
6
, 1080i @ 29.97 fps, or 1080p
3
/PsF @ 23.98 fps
480p @ 59.94 fps
6
720p @ 59.94 fps 720p @ 59.94 fps, 1080i @ 29.97 fps, or 1080p
3
/PsF@ 23.98 fps
1080i @ 29.97 fps
NTSC, 480p @ 59.94 fps
6
, 720p @ 59.94 fps, 1080i @ 29.97 fps, or
1080p
3
/PsF @ 23.98 fps
1080PsF @ 23.98 fps
1080p @ 23.98 fps
3,4
1080p/24
5
1080PsF @ 24 fps
4,7
1080p/PsF @ 24 fps
3,7
1080p@ 24 fps
3,4
1080p/25
PAL
PAL, 576p @ 50 fps
6
, or 1080p
3
/PsF @ 25 fps
576p @ 50 fps
6
720p @ 50 fps 720p @ 50 fps or 1080p
3
/PsF @ 25 fps
1080PsF @ 25 fps
PAL, 576p @ 50 fps
5
, 720p @ 50 fps, or 1080p
3
/PsF @ 25 fps
1080p @ 25 fps
3,4
1080p/29.97
NTSC
NTSC, 480p @ 59.94 fps
6
, or 1080p
3
/PsF @ 29.97 fps
480p @ 59.94 fps
6
720p @ 59.94 fps 720p @ 59.94 fps or 1080p
3
/PsF @ 29.97 fps
1080PsF @ 29.97 fps
NTSC, 480p @ 59.94 fps
6
, 720p @ 59.94 fps, or 1080p
3
/PsF @ 29.97 fps
1080p @ 29.97 fps
3,4
1
Main output on MXO2 Mini is always analog.
2
Secondary output on MXO2 Mini is always HDMI.
3
1080p is supported on the HDMI and SDI outputs only.
4
Not available on MXO2 Mini.
5
To downconvert a 720p/23.976, 1080p/23.976, or 1080p24 sequence to SD to record a digital cut, you must change
your project’s format (project type) to SD (see “Exporting your sequence to tape” on page 167).
6
480p @ 59.94 fps and 576p @ 50 fps are supported on the HDMI output only.
7
1080PsF @ 24 fps is supported on the SDI output only.
Matrox MXO2 output
Project video format Main output
1
Secondary output
2