Operating Instructions – Labmaster
©
130 and MB20G Systems
Instruction Manual
Chapter 2: Liability, Warranty & Safety
© MBraun, Inc. Edition 1/2007 Page 2-7
2.12 Additional Information
The system is considered to be unsafe for operation if:
• there is any visible damage;
• it fails to perform according to specification;
• it has been subject to prolonged storage under unfavourable conditions;
• it has been subjected to severe transport stress.
If the system meets any or all of the above:
• make it inoperable;
• secure it against any unauthorized or unintentional operation;
• contact the MBRAUN Service Department.
Do not perform any service or repair of the system or its
components other than described in this manual.
Maintenance, repair and service other than described in this manual
may only be performed by MBRAUN service personnel or properly
trained/qualified individuals.
To Next Page
Loading...
