Operating Instructions – Labmaster
©
130 and MB20G Systems
Instruction Manual
Chapter 7: Installation
© MBraun, Inc. Edition 1/2007 Page 7-15
Using a 13mm wrench continue to lower the
leveling feet until the casters are raised off the
ground.
7.13 Power and Gas Supply
Plug the main power cable (I) on the purifier into the main power supply outlet.
Attach the working gas line from the purifier to the working gas supply.
Attach the regeneration gas line from the purifier to the regeneration gas supply.
Place the foot pedal on the floor in front of the system in an easily accessible location.
The installation is now complete.
To Next Page
Loading...
