Operating Instructions – Labmaster
©
130 and MB20G Systems
Instruction Manual
Chapter 2: Liability, Warranty & Safety
© MBraun, Inc. Edition 1/2007 Page 2-1
CHAPTER 2: LIABILITY, WARRANTY & SAFETY
2.1 General Information
Prior to installation, initialization and operation of the system, this manual should be read in its
entirety and positioned in a suitable area near the system to allow for easy reference. Any
persons charged with the transport, storing, installation, commissioning, operating, maintenance
and/or service of this system must be familiar with the entire contents of this manual.
To ensure safe operation of the system and to maintain a safe working environment, the
information contained within this chapter must be adhered to by all users of the system. Advice
contained in this chapter is intended to supplement, not supersede, the safety advice given in
other chapters of this manual and the general safety regulations and guidelines prevailing in the
user’s workplace.
In addition to the guidelines and information contained within this manual all internal and local
health, safety and environmental guidelines should be followed.
Safety instructions and pertinent information are marked in the following manner:
Indicates an imminently hazardous situation which, if not avoided,
will result in death, serious injury or serious damage to the system,
other equipment or surrounding environment.
Indicates a potentially hazardous situation which, if not avoided,
could result in death, serious injury or serious damage to the
system, other equipment or surrounding environment.
Indicates a potentially hazardous situation which, if not avoided,
may result in minor or moderate injury or damage to the system,
other equipment or surrounding environment.
Indicates additional advice or recommendations for using the
system or completing a task.
Please consider all instructions, in particular safety instructions, in order to achieve safe
operation of the system.
2.2 Liability
The manufacturer will not take any liability of object, personal or secondary damage caused by
improper use or ignoring of safety instructions as well as caused by the owner’s manual due to
missing updates after the system or its software have been modified, nor will the manufacturer
take any liability of damages due to loss of data. In addition, the terms of business that are part
of the order/contract will apply.
Our products are continuously modified an improved due to innovation, legal requirements and
standards. Consequently, the information give in this documentation may not accurately reflect
every detail of the system actually delivered. Please contact the manufacturer in cases of
uncertainty.
To Next Page
Loading...
