Operating Instructions – Labmaster
©
130 and MB20G Systems
Instruction Manual
Chapter 10: Maintenance & Troubleshooting
© MBraun, Inc. Edition 1/2007 Page 10-5
Touch the input field for the date and/or time to
display an alphanumeric pad.
Enter the correct information according to the
instructions detailed at the beginning of Chapter 4.
After making the appropriate changes, touch the
Main or Back buttons to access the Start Screen
and resume normal operation.
10.4 Replacing the Gloves
General Information
M.Braun recommends replacing the gloves at regular intervals. The gloves must be changed
upon signs of wear and tear that may or have caused a leak.
Before replacing the gloves ensure that the glovebox is atmosphere
is safe to breathe. If necessary purge the glovebox to fill it with
ambient air prior to changing the gloves.
Carefully remove the two o-rings
securing the glove in place.
Carefully remove the glove from the
gloveport.
To Next Page
Loading...
