Operating Instructions – Labmaster
©
130 and MB20G Systems
Instruction Manual
Chapter 5: System Screens
© MBraun, Inc. Edition 1/2007 Page 5-5
5.6 Functions Screens
Not all functions shown on this screen are included with every
system. In the event of a component or function not being included,
the button will not be displayed on this screen.
Functions Screen 1
Accessed via the Start Screen by
touching the Functions button.
Circulation Purifier and Regeneration
Purifier 2 buttons are permanently grayed
out for single purifier systems.
Button
Description
Used to activate and deactivate the
circulation process.
Used to activate the regeneration
process.
Used to activate and deactivate the
vacuum pump.
Used to activate and deactivate the
analyzer(s). (This button is grayed out
when analyzers are not present on
the system.)
Used to activate the automatic purge
process.
Used to turn the light on and off.
Used to turn the freezer on and off.
(This button is only present when
there is a freezer on the system.)
To Next Page
Loading...
