Operating Instructions – Labmaster
©
130 and MB20G Systems
Instruction Manual
Chapter 9: System Operation
© MBraun, Inc. Edition 1/2007 Page 9-13
Remove the door.
Gently pull out the sliding tray.
Place the materials to be used on the tray and slide the tray back into the antechamber.
Replace the cover and lock into place by turning in a clockwise motion.
Evacuate the antechamber by turning the hand valve
to the Evacuate position.
Wait for the gauge to settle at the negative position
and continue to evacuate for:
Non-porous Material: 3 minutes
Porous Material: 12 hours
Refill the antechamber by turning the valve to the
Refill position.
To Next Page
Loading...
