70 MDS iNET 900 User’s Guide MDS 05-2806A01, Rev. A
Receive on Address Receive IP data only from
this source and pass it
through to the connected
serial device.
0.0.0.0 Any legal IP address
Seamless Mode Used for protocols that do
not allow any gaps in the
data stream.
Disabled Enabled/Disabled
Delimiter Chars Number of characters that
represent the end of a
message (inter-character
timeout).
00–1,000
Latency Chars Maximum amount of time,
expressed in the number of
characters, that the remote
end will wait for before
starting to transmit buffered
characters.
00–100
Table 2-10. Device Information Menu Structure and Functions
Submenu Description Default Acceptable Range
User Password User-level password “admin” 8-character
alphanumeric string
(no spaces allowed)
Console Baud Rate Baud rate of the COM1
(console) port
19200 1200, 2400. 4800.
9600, 19200, 38400,
57600, 115200
Device Names
• Device Name
• Owner
• Contact
• Description
• Location
iNET’s user-defined name <blank> 20-char alphanumeric
string
Information for use by
network administrators.
<blank> 40-char alphanumeric
string
Date Current calendar date 1/1/02 Any legal calendar date
(11 chars)
Time Current system time-of-day,
in military format
0:00:00 Any legal time-of-day in
military format (8 chars)
Date Format Format in which the date is
displayed
Generic Generic = dd Mmm yyyy
European =
dd-mm-yyyy
US = mm-dd-yyyy.
Model Number ——
Serial Number Serial number of the iNET Factory specified
Hardware Version Version ID of iNET
hardware
Factory specified
Firmware Version Current firmware being used — 1.1.0 or higher
Uptime Current system uptime in
HH:MM:SS
0,0,0,0 —
Table 2-9. Serial Config. (COM1/COM2) Menu Structure and Functions (Continued)
Submenu Description Default Acceptable Range
To Next Page
Loading...
