MDS iNET 900 - Page 79

MDS 05-2806A01, Rev. A MDS iNET 900 User’s Guide 71
Table 2-11. Performance Information Menu Structure and Functions
Submenu Description Default Acceptable Range
RSSI by Zone Table of running-average
RSSI values versus Freq
Zone
–110 dBm to –40 dBm
Event Log Link to Error and Operations
logs menu
Packet Statistics Link to Packet Statistics
Menu
Wireless Network
Status
Remotes Only
Remote Listing Link to display of information
about iNET Remotes
associated with this
network.
Endpoint Listing Link to display of information
about user-connected
devices connected to iNET
Remotes associated with
this network.
Remote Perf. Listing Link to display of information
about data packet transfer
at each iNET Remote
associated with this
network.
RF Output Power Current running average of
output
20 to 30 dBm
Signal-to-Noise Average signal-to-noise
ratio of all channels
0 to 40 dB
RSSI Current running-average
RSSI value over entire
frequency range
–110 dBm to –40 dBm
Table 2-12. Maintenance Menu Structure and Functions
Submenu Description Default Acceptable Range
Reprogramming
• TFTP Host Address IP address of the host that
the file will be sent via TFTP
<none> Any standard IP
address
• Filename Name of the f/w file to TFTP
into the iNET
<none> Any 40-character
alphanumeric string
• TFTP Timeout Time in seconds the TFTP
server will wait for a packet
ACK (acknowledgment)
from the iNET before
suspending the file transfer.
10 seconds 10 to 120 seconds
• Retrieve File Name of the firmware file to
be transferred via TFTP into
the radio
<none> Any 40-character
alphanumeric string
• Image Verify Service to verify the integrity
of an image
n/a n/a
• Image Copy Service to copy one image
to the other image
n/a n/a