TA80V User Manual
Chapter 7 User Maintenance
Warning
In order to prevent fire, please use approved lubricants for anesthesia or oxygen equipment.
Do not use lubricants containing oil or grease. Lubricants containing oil or grease may burn or
explode when oxygen reaches a certain concentration.
All covers used on the system must be antistatic (conductive) materials. Static electricity may cause a
fire.
Warning
Please follow the disinfection control and safety regulations, because the used equipment may
contain blood and body fluids.
Warning
Moving parts and detachable parts can be pinched or crushed. Be careful when moving or replacing
system components.
Warning
In the process of handling the product, be sure to avoid impact and vibration of the flowmeter,
otherwise the glass tube will be broken.
Warning
Disposal of waste equipment (such as batteries and LCD screens) that cause certain environmental
hazards must be carried out in accordance with relevant local regulations and requirements.
7.1. Maintenance Principle
Do not use faulty equipment. Let an authorized service representative of the company complete
all necessary repairs. After the repair is completed, the equipment should be tested to ensure that the
equipment functions normally and conforms to the manufacturer's specifications.
In order to ensure the reliable function of the equipment, all maintenance or equipment repair
work should be completed by authorized service representatives of the company. If this is not
possible, qualified, well-trained personnel with experience in repairing such equipment can also
complete the replacement and maintenance of the parts listed in this manual.
Warning
Personnel without experience in repairing such equipment must never repair the machine
Parts produced or sold by our company should be used to replace damaged parts, and then tested to
ensure that the equipment meets the manufacturer's specifications.
If you need service support, please contact your local service representative of our company. In all
cases, repair costs will be charged at the price of replacement parts in the company’s current prices
plus reasonable labor costs, except for repairs during the company’s warranty period.
To Next Page
Loading...