TA80V User Manual
Chapter 1 Foreword
1.1 About TA80V Veterinary Anesthesia Workstation
TA80V is a Easy-Moved, integrated, and intuitive anesthesia delivery system. Ventilators not only
provide mechanical ventilation for animal patients during surgery, but also monitor and display
different parameters in animal patients.
The ventilator used in this system is controlled by a microprocessor and is equipped with parameters
and waveform monitoring, capacity mode, and other optional functions. The ventilator used in the
system has a built-in turbine without an external high-pressure gas source, controlled by a
microprocessor, and equipped with parameters and waveform monitoring, VCV,PCV,SPONT mode,
and other functions.
Existing optional features may not be included in the instructions in this manual. The system can also
attach other devices to the top level or the middle platform. For details of the existing local system,
please consult the local office.
Warning
The user of this machine should be a dedicated anesthesiologist and should be
trained in the use of the TA80V anesthesia machine.
Warning TA80V can not be used in the MRI environment.
1.1.1 Range of Application
The standard configuration of this system is suitable for animal patients above 0.5 Kg.
The TA80V veterinary anesthesia machine is mainly used in animal hospital operating rooms, and
can also be used in animal hospital emergency rooms, animal scientific research and other places
where anesthesia is required.
1.1.2 Contraindication
No contraindications are found in this product.
1.2 Symbols in the Manual
Warnings and notes indicate potential hazardous conditions for not following this manual
instructions.
Warning indication of conditions that may cause injury to the operator or animal patient.
Note the conditions that may cause damage to the equipment.
Other symbols are used on the device or in the manual in place of written instructions. Not all of these
symbols appear on the equipment or in the manual. These symbols include:
To Next Page
Loading...