Meditech TA80V - Chapter 9 Specifications and Working Principle; Environmental Requirements; Physical Technical Specifications

TA80V User Manual
63
Chapter 9 Specifications and Working Principle
9.1. Physical Technical Specifications
All specifications are approximate values and may be changed at any time without notice
Attention Do not place the machine in a shock environment.
Attention Do not place heavy objects on the machine surface or drawer
System
Highth:
1310mm
Width:
820mm
Depth:
430mm
Weight:
80kg
Top frame
load-bearing limit：
30kg
Caster
75mm (3in), with brakes on the front casters.
Drawer
160mm height 380mm wide 320mm deep
Ventilator monitor
9’ TFT LCD
Pipeline pressure gauge
Range: 0 ~ 1MPa. Resolution: 0.02MPa. Accuracy: 2.5% of the full range.
Yoke pressure gauge
Range: 0 ~ 25MPa. Resolution: 0.2MPa. Accuracy: 2.5% of the full range.
Airway pressure gauge
Range: -2 ~ 10 kPa. Resolution: 200Pa. Accuracy: 2.5% of the full range.
9.2. Environmental Requirements
Temperature
operate:
10 ~ 40℃
Storage:
-20 ~ 55℃
Relative humidity
operate:
Not more than 80%, and no condensation
Storage:
Not more than 93%, and no condensation
Atmospheric pressure
operate:
70 ~ 106kPa
Storage:
50 ~ 106kPa
Altitude
operate:
500 ~ 800mmHg （3565 ~ -440m）
Storage:
375 ~ 800mmHg （5860 ~ -440m）
Attention
The equipment should be stored in a well-ventilated room free from corrosive
gases and strong magnetic fields.
Attention When the storage conditions exceed the environmental requirements, when the
storage state is transferred to the use state, it should be placed under the use
environmental conditions for more than 8 hours before use.