Meditech TA80V - Maintenance of the Respiratory System; Pressure Sensor Zero-Point Calibration

TA80V User Manual
47
7.3. Maintenance of the Respiratory System
If parts are found to be broken, deformed or worn, they should be replaced when cleaning the
respiratory system
Please refer to the appropriate sections for reassembly and testing.
7.3.1. Pressure Sensor Zero-point Calibration
If the zero drift of the pressure sensor is too large, perform the zero calibration of the pressure sensor.
Pressure sensors include airway pressure sensors and driving gas pressure sensors.
Step 1
First switch to "Standby" ,
touch the "System " button
to view the menu.
Step 2
Touch the "System Check"
button to view the menu.
Step 3