HARDWARE MANUAL Document reference MAMPS-HW/E
VM600 machinery protection system (MPS) Edition 18 - March 2022
8-2
Introduction
INSTALLATION
A condition monitoring system (CMS) using the VibroSight
®
software from the Meggitt
vibro-meter
®
product line can use the following hardware:
• XMC16 extended monitoring card for combustion (ABE04x only)
• XMV16 extended monitoring card for vibration (ABE04x only)
• XMVS16 extended monitoring card for vibration (ABE04x only)
• XIO16T extended input/output card, for use with the XMC16, XMV16 or
XMVS16 (ABE04x only).
NOTE: Further information on this CMS hardware can be found in the
VibroSight help (VibroSight.chm).
To Next Page
Loading...
