HARDWARE MANUAL Document reference MAMPS-HW/E
VM600 machinery protection system (MPS) Edition 18 - March 2022
2-40
RPS6U rack power supply (ABE04x only)
OVERVIEW OF VM600 MPS HARDWARE
2.10.9.11 AC-input (120 V
AC
only) panel with commoned individual inputs
This rear panel has two AC inputs (120 V
AC
only) with mains sockets and on/off switches that
provide a common input to the AC-input version of the RPS6U power supplies in a VM600
rack.
Figure 2-27 shows:
a. The associated panel at the rear of the ABE04x rack
Rear panel ordering number: 200-582-962-NHh
(equivalent VM600SYS order option code: F620).
b. Details of the associated VM600 rack power supply wiring.
(The front panel of the DC-input versions of the RPS6U rack power supply is shown in
Figure 2-16.)
A VM600 rack power supply solution using this AC-input panel is intended for use with two
external AC-mains (120 V
AC
only) supplies and can support external power supply
redundancy. See 2.10.7 VM600 racks and power supply redundancy and Table 2-1.
To Next Page
Loading...
