Mercury 75 Service Manual

4-28 - POWERHEAD 90-830234R3 DECEMBER 1997
Cylinder Block Cover
18 lb. ft. (24.4 Nm)
Exhaust Cover (and Divider Plate)
18 lb. ft. (24.4 Nm)
USA - 437999/BEL-9926999 &
BELOW
Electrical Component Plate
13.5 lb. ft. (18.3 Nm)
Loctite 271 Required.
USA -438000/BEL-9937000 & UP
Electrical Component Plate
200 lb. in. (22.6 Nm)
Loctite 271 Required.
We recommend that you read the sub-section on reassembly BEFORE proceeding. There are specifics
relating to this engine which are NOT applicable to prior engines.
7
Loctite 271 (92-809820)
7
7
Loctite 271 (92-809820)
7

Mercury 75 Specifications

General

Horsepower	75 hp
Starting	Electric
Cylinders	3
Warranty	3 years
Shaft Length	20 in. or 25 in.