Mercury 75 Service Manual

90-830234R3 DECEMBER 1997 MID-SECTION - 5B-23
17. Use suitable punch to drive out lower pivot pin.
a
53951
a - Pivot Pin
18. Tilt power trim assembly (top first) out from clamp
bracket and remove assembly.
53944
19. Remove fill screw and drain unit.
a
53945
a - Fill Screw
20. Remove O-ring from fill cap.
51194

Mercury 75 Specifications

General

Horsepower	75 hp
Starting	Electric
Cylinders	3
Warranty	3 years
Shaft Length	20 in. or 25 in.