6 - ORDINARY MAINTENANCE
6 - 13
PERIODIC MAINTENANCE SCHEDULE
COMPONENT * EVERY 10 HOURS OPERATION
Hydraulic oil Check level and top up
Hydrostatic transmission oil Check level and top up
Engine cooling system Check level and top up
Tyres and wheel bolts Inspect
Safety belts Inspect
COMPONENT * EVERY 50 HOURS OPERATION
Boom sliding pads (Internal) Grease
Reduction hub articulation Grease
Brakes pads Check wear
Tires and stud bolts Check pressure and stud bolts tightening
Air ventilation filter Clean
Diesel pre-filter (only for DEUTZ engines) Drain water
Engine air intake hoses Check connections
Battery Check electrolyte level and terminals
Engine air filter Clean
Brake fluid Check level
Sliding pads of the telescopic boom (outer pads) Check
Plunger for quick uncoupling of attachments Grease
COMPONENT EVERY 500 HOURS OPERATION
Hydraulic oil tank bleeder filter Replace the filter
Reduction hub oil Check level
Differential oil Check level
Gear box oil Check level
Cap screws and bolts Check tighten
Universal joints Grease
Fuel tank Drain water and sediments
Hydrostatic transmission oil filter Replace
Hydraulic oil filter on return line Replace
Engine air filter Replace the filter
Sliding pads of the telescopic boom (inner pads) Check
Pipeline guide pipe (only for models P40.9PLUS –
P60.10 – P60.10EE – P72.10 – P72.10EE)
Check
Diesel pre-filter (only for KUBOTA engines) Check
Chain transfer unit oil (only for DEUTZ engines) Check level
COMPONENT EVERY 1000 HOURS OPERATION
Articulated joints Check the play and grease
Boom sliding pads (External) Grease
Anti-dust filter Replace
Hydraulic pipes/hoses Inspect
COMPONENT EVERY 1500 HOURS OPERATION
Hydrostatic transmission oil Replace
Hydraulic oil Replace
Gear box oil Replace
Differential oil Replace
Reduction hub oil Replace
Brake fluid Replace
To Next Page
Loading...