4 - COMMANDS AND INSTRUMENTS
4 - 31
LIGHTS AND HORN ON/OFF LEVER (24)
Lever (24), located beside the steering wheel, allows you to switch the lights on
your machine on/off, and to operate the horn. To carry out these operations, the
ignition key (8) needs to be in position "R".
Should the ignition key (8) be in position "0", the operation of lever (24) is
disabled.
SWITCHING OFF THE LIGHTS (Fig.M)
To switch off all the lights on your machine, turn the switch of control lever (24) to
position "0"
TAIL LIGHTS (Fig.N)
To switch on the tail lights, turn the switch of control lever (24) to position "1"
LOW-BEAM HEADLIGHTS (Fig.P)
To switch on the low-beam lights, turn the switch of control lever (24) to position "2"
TURN INDICATORS (Fig.R)
To switch on the right turn indicators, shift lever (24) to position "C"
To switch on the left turn indicators, shift lever (24) to position "D"
HIGH-BEAM HEADLIGHTS (Fig.S)
To switch on the high-beam lights, shift lever (24) to position "A"
To flash the high-beam lights, shift lever (24) to position "B"
HORN (Fig.T)
To operate the horn, press button "B" placed at one end of lever (24)
To Next Page
Loading...