MERLO PANORAMIC - Serial Number of the Machine; Identification and Type Approval Plates

2 - MACHINE TECHNICAL INFORMATION
2 - 28
SERIAL NUMBER OF THE MACHINE
CHASSIS NUMBER
The chassis number of your machine is printed on the front right side of the
chassis, and coated with a layer of black paint. When requesting assistance or
spare parts, please provide Merlo Technical Support Service with both the
chassis number and the Sav number of your machine.
This code is made up of 17 characters, divided into 3 sectors, and shows the
manufacturing data of your machine.
An example of a chassis number stamped on a chassis is given below:
• chassis identification code: ZF1A28L01C1190883
ZF1: code that identifies MERLO S.p.A.
A28L01: specific model code
C1190883: code that identifies the manufacturing decade (C= 2010-2019), the manufacturing year (1=2011), the
manufacturing progressive number (1908), and the engine code (83)
IDENTIFICATION AND TYPE APPROVAL PLATES
• MACHINE IDENTIFICATION PLATE
The machine identification plate is placed in the rear left part of the cab and
provides the operator with the following data:
- Model
- SAV number
- Maximum capacity
- Weight
- Chassis number
- Manufacturing year
• MACHINE IDENTIFICATION PLATE (SWISS MARKET)
The machine identification plate is placed in the rear left part of the cab and
provides the operator with the following data:
- Model
- Total permissible mass
- Chassis number
- Maximum permissible load per axle (front and rear)
- Maximum load
- Manufacturing year
- SAV number
• MACHINE IDENTIFICATION PLATE (GERMAN MARKET)
The machine's identification plate is applied in the engine compartment and
provides the operator with the following information:
- German homologation certificate (ABE)
- Total weight of the machine
- Chassis number
- Weight on front and rear axle
- Capacity of the machine
- Manufacturing year
- ABE version
- ABE homologation number
- SAV number of the machine
- Total unladen mass of the machine