2 - MACHINE TECHNICAL INFORMATION
2 - 29
• ENGINE IDENTIFICATION PLATE
The engine identification plate is applied in the upper part of the engine, and provides you with engine data and specifications.
Should you need information, support, or original spare parts, please provide the engine Manufacturer with the data shown on
the engine identification plate.
• TYPE APPROVAL PLATE FOR DRIVING ON PUBLIC ROADS
The machine type approval plate for driving on public roads is located in the front
part of the cab and provides the operator with the following data:
A- Type of machine
B - Modification
C - Manufacturing year
D - Identification no.
E - Type approval no.
F - Maximum permissible load
G - Maximum load on front axle
H - Maximum load on rear axle
I - Towable weight with assisted braking (hydraulic)
L - Towable weight with assisted braking (pneumatic)
M - Towable weight with overrun braking
• TYPE APPROVAL PLATE DNT01A
The type approval plate for the DNT01A cab is applied inside the cab itself and
indicates:
- ISO 3449 standards - Falling Object Protective Structures (FOPS)
- ISO 3471 standards - (ROPS)
To Next Page
Loading...