Quadra-Chek
®
QC200
3-27
Step 3
Use the arrow keys to highlight annot (annotation) in the list as shown.
Step 4
Press the enter key.
Forward annotation displays the required number of points as shown.
NOTENOTE
NOTENOTE
NOTE
This example of forward annotation required four points. ForThis example of forward annotation required four points. For
This example of forward annotation required four points. ForThis example of forward annotation required four points. For
This example of forward annotation required four points. For
space reasons the measuring sequence is shown from threespace reasons the measuring sequence is shown from three
space reasons the measuring sequence is shown from threespace reasons the measuring sequence is shown from three
space reasons the measuring sequence is shown from three
points. The total number of points is given on the last screen.points. The total number of points is given on the last screen.
points. The total number of points is given on the last screen.points. The total number of points is given on the last screen.
points. The total number of points is given on the last screen.
To Next Page
Loading...
