Microtest 6632 Series - Page 67

62
<Command>
:STATus:OPERation:ENABle <NR1>
:STATus:OPERation:ENABle?
Function：It sets or queries the status of Operation Enable Register.
Description：
Set parameter 0~65535 <NR1>
Set syntax
:STATus:OPERation:ENABle 65535
Query syntax
:STATus:OPERation:ENABle?
Return data 65535 (Format is in <NR3>)
<Command> :STATus:QUEStionable:CONDition?
Function：It queries the status of Questionable Condition Register.
Description：
Return data 0~65535 (Format is in <NR1>)
<Command> :STATus:QUEStionable:EVENt?
Function：It queries the status of Questionable Event Register.
Description：
Return data 0~65535 (Format is in <NR1>)
<Command> :STATus:QUEStionable:ENABle
<NR1>
:STATus:QUEStionable:ENABle?
Function：It sets or queries the status Questionable Enable Register.
Description：
Set parameter0~65535 <NR1>
Set syntax
:STATus:QUEStionable:ENABle 65535
Query syntax
:STATus:QUEStionable:ENABle?
Return data 0~65535 (Format is in <NR1>)
<Command>
*CLS
Function：It clears Error Queue, Standard Event Status Register, Status Byte Register, and
Operation Event Register.
<Command>
*ESE <NR1>
*ESE?
Function：It sets or queries the status of Standard Event Status Enable Register.
Description：
Set parameter 0~255
Set syntax
*ESE 1
Query syntax
*ESE?
Return data 0~255 (Format is in <NR1>)
<Command>
*ESR?
Function：It queries the status of Standard Event Status Register, clean the Register after
executed.
Description：
Return data<NR1>