Microtest 6632 Series - Page 82

77
<Command>
:LIST:TRIGger:DELay <delay time NR3/disc>
:LIST:TRIGger:DELay?
Function：It sets or queries the TRIGGER DELAY of list mode.
Description：
Set parameter
The value of delay time is {0.0~5|MAXimum|MINimum}.
Set syntax
:LIST:TRIGger:DELay 0.5
:LIST:TRIGger:DELay 500M
:LIST:TRIGger:DELay 500MS
:LIST:TRIGger:DELay 5E-3
:LIST:TRIGger:DELay MAXimum
:LIST:TRIGger:DELay MINimum
Query syntax
:LIST:TRIGger:DELay?
Return
data
0.500 (Format is in <NR2>)
<Command>
:LIST:OIMPedance {100|25}
:LIST:OIMPedance?
Function：It sets or queries the RO of list mode.
Description：
Query syntax
:LIST:OIMPedance?
Return data
100|25 (Format is in <NR1>)
<Command>
:LIST:ALC {OFF|ON|0|1}
Function：It sets or queries the ALC of list mode.
Description：
Query syntax :LIST:ALC?
Return
data When the setup is OFF, it returns 0.
When the setup is ON, it returns 1.
<Command>
:LIST:BEEPer {OFF|PASS|OK|FAIL|NG|0|1|2]
:LIST:BEEPer?
Function：It sets or queries the BEEP WHEN of list mode.
Description：
Set parameter
OFF, PASS|OK, FAIL|NG
Set syntax
:LIST:BEEPerPASS
:LIST:BEEPer NG
:LIST:BEEPer OFF
Query syntax
:LIST:BEEPer?
Return data PASS |FAIL |OFF (Format is in <disc>)
<Command>
:LIST:RANGe {AUTO|HOLD|0|1}
:LIST:RANGe?
Function：It sets or queries the RANGE of list mode.
Description：
Set parameterIf selecting <ON>, the measuring range is hold at the range, which is used by
the first time measuring. If selecting <OFF>, the most suitable test range is set automatically.
Set syntax
:LIST:RANGe AUTO
:LIST:RANGe 1
Query syntax
:LIST:RANGe?
Return dataAUTO |HOLD (Format is in <disc>)