Microtest 6632 Series - Page 83

78
<Command>
:LIST:RETest {OFF|STEP|ALL|0|1|2}
:LIST:RETest?
Function：It sets or queries the FAIL RETEST of list mode.
Description：
Set parameterIt retests continuously until the test result is pass, when the test result is fail. If
selecting <OFF>, it doesn’t execute this function. If selecting <STEP 1>, only the first step is
going to retest. If selecting <ALL>, no matter which step occur fail result, the fail step is going
to retest until the result become pass.
Set syntax
:LIST:RETest STEP
:LIST:RETest 2
:LIST:RETest OFF
Query syntax
:LIST:RETest?
Return dataOFF | STEP |ALL (Format is in <disc>)
<Command>
:LIST:UPLoad {0|1}
:LIST:UPLoad?
Function：It sets or queries the auto upload of list mode.
Description：
Set parameterIf it gives <0>, it closed the upload function. If it gives <1>, it opens the upload
function.It uploads the list test data automatically, when the upload function is opening.If you
abort the list test, it won't upload the test data.
<Command>
:LCORrection:OPEN
:LCORrection:OPEN?
Function：It sets or queries to do the open correction of list mode.
Description：
:LCORrection:OPEN?
Querysyntax
:LCORrection:OPEN?
Return data When correction fail, it returns 0.
When correction passes, it returns 1.
<Command>
:LCORrection:SHORt
:LCORrection:SHORt?
Function：It sets or queries to do the short correction of list mode.
Description：
Query syntax:LCORrection:SHORt?
Return data
When correction fail, it returns 0.
When correction passes, it returns 1.
<Command>
:LCORrection:OPEN:STATe {OFF|ON|0|1}
:LCORrection:OPEN:STATe?
Function：It sets or queries the open correction status of list mode.
Description：
Query
syntax
:LCORrection:OPEN:STATe?
Return
data
When the setup is OFF, it returns 0.
When the setup is ON, it returns 1.
<Command
> :LCORrection:SHORt:STATe {OFF|ON|0|1}
:LCORrection:SHORt:STATe?
Function：It sets or queries the short correction status of list mode.
Description：
Query
syntax
:LCORrection:SHORt:STATe?
Return
data
When the setup is OFF, it returns 0.
When the setup is ON, it returns 1.