92
oscilloscope can recognize the type of input signal and adjust the control mode, It automatically adjusts the
vertical scale, horizontal scale and trigger setting, and adjust the waveform to the best display state.
For details, please refer to “2.10 Use Auto” in Chapter 2.
9.9 Measurement
Tap in the right function area to open or close the automatic measurement menu.
For details, please refer to “6.1 Automatic Measurement” in Chapter 7.
9.10 Trigger
Tap in the right function area to quickly open or close the trigger menu.
For details, please refer to Chapter 5 Trigger System.
9.11 Home
Tap in the right function area, switch to the oscilloscope homepage.
For details, please refer to Chapter 11 Homepage Functions.
To Next Page
Loading...
