Miele CVA2650 - Page 88

Technical Information
88
CVA 265x & CVA 266x
Function Option/Component Activated Description
ID number
EPWZ
ID no. and version of EPWZ
855 control/display electronic
EPL
ID no. and version of EPL 855
power electronic
Fault memory
Fault codes are listed, one at a time.
See Table 060-2 for fault code
descriptions.
Delete
Press O
K
to clear the fault
memor
y
.
Component test
M26 (Brew unit)
1
Initialize To reach the lowered end
position, the capsule plate must
be removed from the brew unit
beforehand.
The press position can only be
reached with the capsule plate
installed.
(See also Table 060-14.)
Rest position
Eject position
Press position
Service position
Continuous upwards
Continuous downwards
M29 (Ceramic valve)
1
Initialize
The position of the step contact
switch (S51/1) is indicated in
the top right corner of the
display. 0 = Switch open;
1 = Switch closed.
Step counterclockwise
Step clockwise
Rest position
Coffee position
Water position
Continuous
counterclockwise
Continuous clockwise
M30 (Capsule transport
motor)
1
Initialize The position of the step contact
feed switch (S51/3) is indicated
in the top right corner of the
display. 0 = Switch open;
1 = Switch closed.
Carry out
Service position
Continuous operation
M31 (Capsule
magazine motor)
1
Initialize
The position of the capsule
magazine step contact
switch (S51/2) is indicated in
the top right of the display.
0 = Switch open;
1 = Switch closed.
Step counterclockwise
Step clockwise
Chamber 1 to 5
Continuous
counterclockwise
Continuous clockwise
1M7 (Steam pump)
Release
The pump passes residual
water/steam along the water
path, see Section 030-2.1.
Cappuccinatore
The pump passes steam along
the water path, see Section
030-2.1.
Continuous operation
The pump is activated
constantly.