Installation
*INSTALLATION*
103
Depending on the specific built-under
installation situation, the stainless steel
cover plate supplied can be attached to the
lower edge of the worktop. The stainless-
steel cover plate protects the lower edge of
the worktop against steam damage.
Moving the dishwasher
Before moving the dishwasher, screw in the
adjustable feet fully so that they do not get
damaged.
Component damage caused by
carrying.
Do not lift the dishwasher by any
protruding components, e.g. the control
panel.
These could break off.
Do not hold onto protruding components
when moving the dishwasher.
Damage caused by transportation
using a sack truck.
Using a sack truck to subsequently move
the dishwasher may cause damage to the
machine.
Only transport the dishwasher on a sack
truck in its original packaging. For
subsequent moves, the dishwasher must
be placed on a continuous base to avoid
damage.
To Next Page
Loading...
