EasyManua.ls Logo

Miele PFD 402 - Cleaning and Care; Periodic Checks

Miele PFD 402
108 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Cleaning and care
77
Periodic checks
To prolong the service life of the
dishwasher, maintenance should be carried
out at least once a year by the Miele
Customer Service Department.
This maintenance will cover the following:
- Electrical safety according to national
regulations (VDE 0701/0702 in Germany)
- Door mechanism and door seal
- Any screw connections and connectors in
the wash cabinet
- Water inlet and drainage
- Internal and external dispensing systems
- Spray arms
- Filter combination
- Sump including drain pump and non-
return valve
- All baskets and inserts
The following operational tests will be
carried out as part of the maintenance:
- A programme will be run as a test run
- Seals will be tested for water tightness
- All relevant measuring systems will be
safety tested, including fault displays
- Safety features
Soiling alters the surface.
Soiling that is left too long might become
impossible to remove and could cause
the surfaces to alter or discolour.
Remove any soiling from the control panel
and from the machine front straight away
where possible.
All surfaces are susceptible to
scratching.
Contact with unsuitable cleaning agents
can alter or discolour all surfaces.
Only use suitable cleaning agents.

Table of Contents

Related product manuals