Miele PFD 402 - Dry; Programme Selection; Extension

Machine functions
50
Dry+
Dry+ active drying is only available on
dishwashers with a drying fan (depending
on the model).
Dry+ active drying accelerates and improves
the drying process at the end of the
programme. When the door is closed, a fan
conveys filtered fresh air into the wash
cabinet for active drying.
You can subsequently activate or deactivate
active drying for all programmes that
support Dry+, as well as extend the fan
running time and in turn adjust the drying
phase for individual programmes. You can
find out which programmes support Dry+ in
“Programme parameters”.
Programme selection
The menu is saved under the following input
path.
Machine functions
Dry+
Programme selection
OK

08:15
Short
Universal
Selection
66°C
66°C
70°C
Hygiene Plus
50°C
Glasses
Intensive
66°C
Hygiene
60°C
All programmes
 Select the programmes for which you
want to activate Dry+. Activated
programmes are highlighted in colour.
 If you want to activate Dry+ for all
programmes, tap on All programmes.
 Press OK to save the selection.
Extension
The fan running time is preset for each
programme and it is only possible to
extend this running time or to cancel an
extension. It is not possible at this point in
time to shorten the preset running time or
to switch off the fan.
The menu is saved under the following input
path.
Machine functions
Dry+
Extend Dry+ time
OK

08:15Extend Dry+ time
66°C
66°C
70°C
66°C 60°C
50°C
Short
Intensive Hygiene
GlassesHygiene PlusUniversal
 Scroll through the programme list and
select the programme for which you want
to extend the fan running time.

OK
08:15
2
1
0
30
29
Universal
min
The running time can be extended by up to
30minutes in 1-minute increments.
 Set the running time. In the lowest setting,
the running time corresponds to the
preset baseline value.
 Press OK to save the setting.