User tips
18
Operation
Operation is carried out via the touch
display as well as via the buttons on the
control panel.
The sensor controls on the control panel
and the buttons on the display react to
finger tip contact. Every touch on the sensor
controls is confirmed by a keypad tone. You
can adjust the volume of the keypad tone or
switch it off (see “Settings/Volume”).
The control panel with sensor controls
and the touch display can be scratched
by pointed or sharp objects, e.g. pens.
Only touch the control field with your
fingers.
Switching on
The dishwasher needs to be connected to
the electricity supply.
Press and hold the button until the
following appears on the display:
As soon as the dishwasher is ready for
operation, the display message changes to
show the programme selection screen, e.g.:
08:15
Programmes
Short
66°C
0:13 h
Universal
66°C
0:19 h
Intensive
66°C
0:21 h
Super Short
55°C
0:05 h
If the Memory function is activated, the most
recently started programme is displayed,
e.g.:
08:15
Programme
Universal
66°C
AutoOpen
0:19 h
Timer
Dry+
Switching off
Press the button.
The dishwasher remains in standby mode
for about one minute before it switches off
completely.
To Next Page
Loading...
