Miele PFD 402 - Leds in Buttons

Guide to the appliance
11
LEDs in buttons
Light-emitting diodes are incorporated in the buttons. They indicate the status of the
dishwasher.
Button LED Display Status
Display
(Reaction to
On/
Offbutton)
ON The dishwasher is switched on.
OFF The dishwasher is switched off.
Start/Stop
button
Pulsing OFF The dishwasher is in standby mode.
ON A programme has been selected but not
yet started.
ON A message has appeared on the display.
Flashes red A fault has occurred (see the fault
message on the display and the “Problem
solving guide”).
ON A programme is running.
OFF A programme has finished.
(Depending on the model)
button
(door button)
ON A programme has been selected but not
yet started.
A programme is running.
FLASHES A programme is finished and the door is
closed.