Miele PFD 402 - Display Brightness; Volume

Settings
55
Display brightness
You can also set the brightness of the
display.
The menu is saved under the following input
path.
Settings
Display brightness
OK

08:15
BrighterDarker
Display brightness
 Adjust the brightness of the display and
save the setting by pressing OK.
Volume
An acoustic signal transmitter is integrated
in the control panel, which can provide
acoustic feedback in the following
situations:
- Keypad tone when operating the buttons
- Buzzer tones at the end of a programme
or for system messages (notifications)
The menu is saved under the following input
path.
Settings
Volume
The volume for the Keypad tone and the
Buzzer tones is always set in the same way.
 Select one of the options Keypad tone or
Buzzer tones.
OK

08:15
Quieter Louder
Buzzer tones
Off
 Set the volume. In the lowest setting, the
sound is switched off and can be
switched back on again if required by
selecting On (displayed instead of Off).
 Press OK to save the setting