Miele PFD 402 - Rinsing Dispensing Paths

Machine functions
49

08:15
Start filling dispensing paths?
Yes No
 Select Yes to start the process.
The dispensing system is filled
automatically. The message Fill dispensing
paths completed is displayed following
successful completion. If filling is
interrupted prematurely, the process must
be repeated.
 Cancel the process at this point by
selecting No.
Rinsing dispensing paths
A dispensing system must be rinsed in the
following situations:
- If a dispensing system was accidentally
filled with the wrong medium.
- If deposits have formed in the dispensing
paths or in the containers, which could
completely or partially clog the systems.
Deposits can form, for example, after long
periods of downtime or when the
containers are refilled instead of being
replaced.
 Fill a clean container, e.g. a bucket, with
clear, clean water.
 Damage to the dispensing system.
Small foreign objects in the water, such
as sand, fluff or similar, can be sucked in
by the dispensing system and may clog
or damage it.
Make sure that there are no foreign
objects in the water.
 Place the suction lance in the container
with the water. The lower end of the
suction lance with the suction opening
must be thoroughly rinsed.
 Secure the suction lance so that it cannot
tip over or fall out of the container.
The menu is saved under the following input
path.
Machine functions
Dispensing systems
Rinse dispensing paths

08:15
Rinse aid
canister
Clean. agent
canister
Rinse dispensing paths
- Clean. agent canister
Rinse the cleaning agent dispensing
system.
- Rinse aid canister
Rinse the rinsing agent dispensing
system.
 Select the dispensing system that you
want to rinse.
You will then be asked if you want to start
the process, e.g.:

Start rinsing dispensing
paths?
Yes No
 Select Yes to start the process.
The dispensing system is rinsed
automatically. The message Rinse
dispensing paths completed is displayed
following successful completion. If rinsing
is interrupted prematurely, the process
must be repeated.
 Cancel the process at this point by
selecting No.