Cleaning and care
78
Wipe lock
You can lock the display when cleaning
the control panel and the display to
prevent accidental operation during
cleaning.
Target temperature
66°C
Actual temperature
51°C
Information
AutoOpen
Open the status window by tapping and
dragging the orange bar at the top of the
display.
Tap the symbol.
The display is locked to prevent operation.
Tap and hold the symbol for
5seconds to end the wipe lock.
Cleaning the control panel
Clean the control panel with a clean
sponge and a solution of warm water and
washing-up liquid, or with a clean, damp
microfibre cloth. Then dry the control
panel with a soft cloth.
Damage to the user interface.
Abrasive cleaning agents can damage the
user interface.
Do not use abrasive cleaning agents!
Cleaning the machine front
To clean the stainless steel front, use a
damp cloth with a solution of washing-up
liquid and hot water, or with a non-
abrasive cleaning agent for use on
stainless steel.
To help prevent re-soiling (fingerprints, etc.),
a suitable stainless steel care product can
be used after cleaning.
Damage to the surfaces.
Cleaning agents containing ammonia and
thinners can damage surfaces.
Avoid these products when cleaning.
Damage to the dishwasher caused by
ingress of water.
Do not clean the dishwasher or its
immediate vicinity with a hose or a
pressure washer.
Make sure that water does not enter the
dishwasher when it is being cleaned.
To Next Page
Loading...
