Miele PFD 402 - Programme Parameters; Selecting a Programme; Main Wash Temperature; Main Wash Holding Time

Further settings
63
Programme parameters
The programme parameters should be
adjusted to suit technical requirements and
the load items.
Additional specialist knowledge about the
machine and its processes is required to
modify programme parameters and this
should therefore be undertaken only by
experienced users or by the Miele Customer
Service Department.
 Start by selecting the programme you
want to change.
Selecting a programme
The menu is saved under the following input
path.
Extended settings
Configure programmes
OK

08:15
Configure programmes
Short
66°C
Intensive
66°C
Hygiene
60°C
Glasses
50°C
70°C
Hygiene PlusUniversal
66°C
 Scroll through the programme list and
select the programme that you want to
change.

08:15
Universal
Cleaning
temperature
Final rinse
temperature
Increased
water quantity
Interim rinse
Final rinse
holding time
Main wash
holding time
Reset
 Select a programme parameter that you
want to change.
Main wash temperature
The main wash temperature is reached by
heating up the wash water. The temperature
needs to be adjusted to the task.
Process chemicals are dispensed at a
default dispensing temperature set ex-
works.

OK
08:15
°C
57
56
55
54
53
Cleaning temperature
 Set the temperature. The adjustment
range varies depending on the model and
programme.
 Press OK to save the setting
Main wash holding time
The holding time is a period during which
the temperature in the wash block is kept
constant.
In the case of the Super Short
programme, the holding time is entered in
seconds and can be adjusted in 5-second
increments.

OK
08:15
Main wash holding time
10
9
8
min
7
6
 Set the holding time.
 Press OK to save the setting