Miele PFD 402 - Networking;Wifi; Wifi Setup; Connection Via WPS

Further settings
73
Networking/WiFi
Your dishwasher is equipped with an
integrated WiFi module.
You can connect your dishwasher to your
local network in order to use digital
solutions from Miele.
An overview of these digital solutions is
available on the webpage:
https://www.miele.co.uk/p/
Once the dishwasher is connected to your
local network, more menu options are
added to the “Further settings” and
“Networking/WiFi” menu.
Check the settings of your WiFi router,
especially when operating several
machines in the WiFi network.
Make sure that your WiFi network signal
is strong enough at the installation site of
your dishwasher.
Place the dishwasher and the router at a
suitable distance from each other.
The menu is saved under the following input
path.
Extended settings
Network/WiFi
WiFi setup

08:15
Set up
Network/WiFi
 Select the Set up menu option.
You can connect your dishwasher to your
network using Via WPS or Via Soft AP.

Which connection method
do you want to use?
Via Soft APVia WPS
Connection via WPS
You can connect your dishwasher to your
WiFi network using WPS (Wi-Fi Protected
Setup).
Your WiFi router must support WPS.
 When asked Which connection method do
you want to use?, select WPS.

Press the WPS button on
your
router.
OK
 When Press the WPS button on your
router. appears on the display, activate
the WPS function on your router within
2minutes.