Commissioning
21
Installation and connection
Before commissioning, the dishwasher must
be securely installed, and the water inlet
and drain hoses and the mains cable
correctly connected. Follow the instructions
in “Installation”, “Water connection” and
“Electrical connection” as well as the
installation plan.
Procedure
The commissioning process follows a set
procedure which cannot be interrupted.
All settings, except for water connections,
can be retrospectively altered via the
Machine functions, Settings and
Extended settings menus.
Switching on
Press the button.
Selecting a language
Commissioning starts with the selection of
the display language.
08:15Language
dansk
deutsch
english
(GB)
français
español
hrvatski
Scroll to the language you want and select
it by tapping on it.
WiFi setup
In the next step, you can connect your
dishwasher to the WiFi network.
08:15
Set up WiFi?
Network/WiFi
Yes
No
Select No if you do not want to integrate
the dishwasher into the WiFi network or
want to do it later.
If you select Yes, the next steps will guide
you through the process to set this up.
Please refer to “Further settings,
Networking/WiFi”.
Setting the date
08:15
2022
09
2023
2024
07
08
10
11
Date
May
April
June
July
August
Set the date. The order of year, month and
day is the same regardless of the date
format set.
Press OK to save the setting.
To Next Page
Loading...
