Miele PFD 402 - Activating Dispensing from the Canister; Deactivating Dispensing from the Canister

Further settings
68
Activating dispensing from the canister
To activate dispensing of liquid process
chemicals from external canisters, you must
proceed as follows.
 Start by selecting a dispensing system.
This selection is only available if the
corresponding dispensing system is
present (depending on the model).
Clean. agent canister
Rinse aid canister
If a rinsing agent door dispenser or a
powder dispenser is present and
activated (depending on the model), when
you select Clean. agent canister or Rinse aid
canister, you will first be asked if you want
to switch to dispensing from the canister.
There is no query if dispensing from the
canister is already activated.
Deactivating dispensing from the
canister
You can subsequently switch dispensing
from the canisters to the door dispensers or
deactivate it completely.
 Start by selecting a dispensing system.
This selection is only available if the
corresponding dispensing system is
present (depending on the model).
Clean. agent canister
Deactivate
Rinse aid canister
Deactivate

Deactivate “cleaning agent canister”?
Yes No

Deactivate “rinse aid canister”?
NoYes
 Select OK to deactivate dispensing from
the canister. This change will take place
immediately.
 If you do not want to change the setting,
press the button.