Miele PFD 402 - Changing the Air Filter (Depending on the Model); Removing the Plastic Support; Replacing the Filter

Cleaning and care
81
 Use a pointed object to push food
particles into the spray arm nozzles.
 Rinse the spray arms thoroughly under
running water.
Replace the spray arms and check that
they rotate freely.
Make sure that the spray arm with the
yellow bayonet fitting is fitted in the bottom
of the wash cabinet.
Changing the air filter (depending
on the model)
The air filter for Dry+drying must be
replaced at regular intervals.
A message will appear on the display when
the filter needs changing.

OK
Change air filter. Then reset filter
interval (see machine functions).
Removing the plastic support
 Push the snap-fit down  and pull the
plastic support forwards to remove it .
Replacing the filter
 Remove the used filter from the plastic
support.
 Insert the new filter into the plastic
support with the printed side facing
down and push the plastic support into
the slot in the plinth until it clicks into
place.
 Reset the filter interval (see Machine
functions, Filter interval).