Miele PFD 402 - Soft AP; Connecting Via Soft-AP

Further settings
74
 Once the connection has been
established, Connection successfully
established will appear on the display.
Confirm the message with OK.
If the connection fails, you have probably
not activated WPS on your router quickly
enough. Repeat the steps above.

08:15Network/WiFi
Deactivate
Set up
again
Connection
status
Reset

- Deactivate
The WiFi connection is deactivated but
the connection options are retained. The
WiFi connection can be reactivated
without having to repeat the connection
process.
- Connection status
Displays the IP address and the
connection status of the WiFi connection.
- New set up
Menu option for setting up a new WiFi
connection.
- Reset
Resets the WiFi connection. The
connection options are lost and need to
be set up again.
Soft AP
If Connection via WPS is not possible, you
can connect the dishwasher to your local
network Via Soft AP.
A Soft-AP (Software-enabled Access Point)
is a wireless access point provided by your
dishwasher that can be used by other
wireless machines in the vicinity.
With Soft-AP, the dishwasher is not
connected to the Internet. A Soft AP is only
used to connect two machines locally via
WiFi.
Connecting via Soft-AP
You can connect your dishwasher to your
WiFi network via a Soft-AP (Software
Enabled Access Point).
 When asked Which connection method do
you want to use?, select Soft AP.

OK
Follow the instructions in the
external application.
 Confirm the message by pressing OK and
follow the instructions in the external
application.
Waiting for connection will appear on the
display. This message remains active for
approx. 10minutes after selection and is
then closed.
 Once the connection has been
established, Connection successfully
established will appear on the display.
 Confirm the message with OK.